THE OFFICIAL WEBSITE OF THE HAMMER’S SLAMMERS THE CRUCIBLE RULES SYSTEM HANDBOOK Click pictures to enlarge Return to Hammers Slammers Galleries page Super detailed 6mm Slammers - by Ralph DeLucia The M2 Blower Herman's Whore This vehicle had an additional tribarrel added to the front of the vehicle (welded to the front skirt, in fact) for the driver to use. I modelled this using 5-6mm long plastic Evergreen 1-2mm rod, cut and bent to shape which I glued on to the front hull. I then took a 6mm scale weapon from a Games Workshop model and glued it on the end rod positioned to be near the drivers hatch. Finishing I wanted to make it look like the AFVs were “hovering” so I glued small washers on the bottom of the hulls to raise them up slightly.    Finally painting these AFVs These were finished primarily in Games Workshop’s Mithril Silver and Chainmail watered down a bit, over a black base coat and blended together on the models. The plates on the lower hulls were painted various greens or gray, again based on pics from “The Crucible” and the Hammer's Slammers websites. Rust, metal chips, etc. added and a light wash of black paint added randomly on the models with some “black lining” to bring out the details.  Decals are from Bad Idea Games. Ralph DeLucia The M2 with the extra weapon added The M2 with the extra weapon added The M2 finished and painted The M2 finished and painted